Mercedes-Benz 2007 SLK 280, Operator'S Manual

Page: 144 / 473

143
Controls in detail
Control system
Lighting submenu
Access the Lighting submenu via the
Settings... menu. Use the Lighting sub-
menu to change the lamp and lighting
settings on your vehicle.
The following functions are available:
Setting daytime running lamp mode
(USA only)
왘
Move the selection marker with
button
æ
or
ç
to the Lighting
submenu.
왘
Press button
j
or
k
repeatedly
until the message Headlamp mode
appears in the multifunction display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to select
manual operation ( Manual ) or daytime
running lamp mode ( Constant ).
With daytime running lamp mode activated
and the exterior lamp switch at
position
M
or
U
, the low beam
headlamps are switched on when the en-
gine is running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
For more information on the daytime run-
ning lamp mode, see “Lighting”
(
컄
page 109).
Function Page
Setting daytime running lamp
mode (USA only) 143
Setting locator lighting 144
Setting night security
illumination 144
Setting interior lighting delayed
shut-off 145
i
This function is not available in countries
where the daytime running lamp mode is manda-
tory and therefore in a constant mode.
i
For safety reasons, resetting all the func-
tions of all submenus to the factory settings
while driving (
컄
page 136) will not deactivate the
daytime running lamp mode.
The following message appears in the multifunc-
tion display:
Lighting Cannot be completely reset to
factory settings while driving
.