Mercedes-Benz 2002 ML 500 Operator'S Manual Download Page 100

Page: 100 / 539

Safety and Security

Driving safety systems

Off-road - 4-ETS

With the off-road driving program switched
on (

컄

page 248), the 4-ETS designed for

off-road use is automatically activated.

For more information, see the “Practical
hints” section (

컄

page 382) and

(

컄

page 387).

Warning!

When you see ESP

-warning lamp

flashing in the speedometer, then proceed

as follows:

앫

While driving off, apply as little throttle
as possible.

앫

While driving ease up on the accelera-
tor.

앫

Adapt your speed and driving style to
the prevailing road conditions.

Failure to observe these guidelines could

cause the vehicle to skid.

The 4-ETS cannot prevent accidents resul-

ting from excessive speed.

Because of the ESP’s

automatic oper-

ation, the engine must be shut off
(

컄

page 34) when the parking brake is

being tested on a brake test dynamom-
eter.

Active braking action through ESP

may otherwise seriously damage the
brake system.

Operational tests with the engine
running can only be conducted on a
two-axle dynamometer.

If the yellow ESP

warning lamp

comes on while driving, the 4-ETS is be-
ing switched off temporarily to prevent
overheating of the drive wheel brakes.
In addition, the message

ESP unavail-

able See Operator’s Manual

appears

in the multifunction display.

Summary of Contents for 2002 ML 500




























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands

Mercedes-Benz 2002 ML 500, Operator'S Manual

Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands