Mercedes-Benz 2002 ML 500 Operator'S Manual Download Page 461

Page: 461 / 539

460

Practical hints

Flat tire

왘

Clean contact surfaces of wheel and
wheel hub.

왘

Guide spare wheel onto the alignment
bolt and push it on the wheel hub.

왘

Insert wheel bolts and tighten them
slightly.

왘

Unscrew the alignment bolt.

왘

Insert the remaining wheel bolt and
tighten it slightly.

Lowering the vehicle

왘

Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.

왘

Remove the jack.

To avoid paint damage, place wheel flat
against hub and hold it there while
installing first wheel bolt.

Warning!

Always replace wheel bolts that are

damaged or rusted.

Never apply oil or grease to wheel bolts.

Damaged wheel hub threads should be

repaired immediately. Do not continue to

drive under these circumstances! Contact

an authorized Mercedes-Benz Light Truck

Center or call Roadside Assistance.

Incorrect wheel bolts or improperly tight-

ened wheel bolts can cause the wheel to

come off. This could cause an accident.

Make sure to use the correct wheel bolts.

Warning!

Use only genuine equipment

Mercedes-Benz wheel bolts. Other wheel

bolts may come loose.

Do not tighten the wheel bolts when the ve-

hicle is raised. Otherwise the vehicle could

fall off the jack.

컄컄

Summary of Contents for 2002 ML 500




























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands

Mercedes-Benz 2002 ML 500, Operator'S Manual

Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands