Mercedes-Benz 2002 ML 500 Operator'S Manual Download Page 407

Page: 407 / 539

406

Practical hints

What to do if …

Display message

Possible cause

Possible solution

Tire pressure display

appears after driving
several minutes

The tire inflation pressure is being checked.

왘

Drive the vehicle for a few minutes.

Tire pressure monitor
inoperative

The Advanced TPMS* is malfunctioning.

왘

Have the Advanced TPMS* checked by an autho-
rized Mercedes-Benz Light Truck Center.

Tire pres. monitor
inoperative
No wheel sensors

There are wheels without wheel sensors
mounted (e.g. winter tires).

왘

Have the Advanced TPMS* checked by an autho-
rized Mercedes-Benz Light Truck Center.

왘

Have the wheel sensors install by an authorized
Mercedes-Benz Light Truck Center.

Tire pres. monitor
Wheel sensor missing

One or more sensors defect (e.g. battery in
one or more wheel sensor is empty).

One or more wheels without wheel sensors
mounted (e.g. spare tire).

왘

Have the Advanced TPMS* checked by an autho-
rized Mercedes-Benz Light Truck Center.

왘

Have the wheel sensors install by an authorized
Mercedes-Benz Light Truck Center.

The tire pressure for the respective tire is not shown
in the multifunction display.

Tire pres. monitor
temporarily
unavailable

The Advanced TPMS* is unable to monitor
the tire pressure due to

앫

a nearby radio interference source.

앫

excessive wheel sensor temperatures.

왘

As soon as the causes of the malfunction have been
removed, the Advanced TPMS* automatically be-
comes active again after a few minutes driving.

Summary of Contents for 2002 ML 500




























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands

Mercedes-Benz 2002 ML 500, Operator'S Manual

Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands