Mercedes-Benz 2002 ML 500 Operator'S Manual Download Page 396

Page: 396 / 539

395

Practical hints

What to do if …

Vehicle status messages in the
multifunction display

Warning and malfunction messages
appear in the multifunction display located
in the instrument cluster.

Certain warning and malfunction messag-
es are accompanied by an audible signal.

Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.

Selecting the vehicle status message
memory menu in the control system
(

컄

page 159) displays both cleared and

uncleared messages.

High-priority messages appear in the
multifunction display in red color.

Certain messages of high priority cannot
be cleared from the multifunction display
using the reset button (

컄

page 24) or

button

, or

on the

multifunction steering wheel.

Other messages of high priority and mes-
sages of less immediate priority can be
cleared from the multifunction display
using the reset button (

컄

page 24) or

button

, or

on the

multifunction steering wheel. They are
then stored in the vehicle status message
memory (

컄

page 159). Remember that

clearing a message will only make the mes-
sage disappear. Clearing a message will
not correct the condition that caused the
message to appear.

Warning!

All categories of messages contain

important information which should be

taken note of and, where a malfunction is

indicated, addressed as soon as possible at

an authorized Mercedes-Benz Light Truck

Center.

Failure to repair condition noted may cause

damage not covered by the Mercedes-Benz

Limited Warranty, or result in property dam-

age or personal injury.

Warning!

No messages will be displayed if either the

instrument cluster or the multifunction dis-

play is inoperative.

Contact the nearest authorized

Mercedes-Benz Light Truck Center.

Summary of Contents for 2002 ML 500




























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands

Mercedes-Benz 2002 ML 500, Operator'S Manual

Search results

Summary of Contents for 2002 ML 500

Reviews:

Related manuals for 2002 ML 500

Brands by name

Popular brands