7
picture
：
1
picture
：
2
picture
：
3
4. Using Instructions
Using treadmill
1. Insert the power plug properly and turn on the switch (in red color) (1). When the light is on, there
will be a beep sound, and then the screen will light up.
2.
Please keep the safety key away from children when the treadmill is not in use. Please put the
silicon oil bottle in places where children cannot reach. If it is eaten or split into eyes by mistake,
please use water to wash and consult doctor immediately.
3.
Safety key Introduction
The treadmill can only start when the safety key is put on the yellow area of the console. Clip the
safety key on clothes when using the treadmill to prevent accidents. Put the safety key back when
continue using the treadmill.
4.Console instructions
Startup
- Normally starts after 3 seconds of countdown.
Programs
- 3 fixed programs and 12 automatic programs.
Safety key function
Disconnect the safety key, "E7" shows on the screen. The treadmill stops gradually, and a Di alarm
sound is let out. Put the safety key back, all the data will be cleared in 2 seconds.
Under any circumstance, the treadmill will stop when disconnect the safety key. There will be prompt
information on the screen. Put back the safety key, screen data will be back to the initial interface.
Button function
1. Start button, Stop button
When the power is on, press the start button to start the treadmill. Stop key: when the treadmill is in
running state, press the stop button, all data will be cleared, and the treadmill gradually comes into a
complete stop and returns to the manual mode.
2. Program key
In standby mode, pressing this key can cycle the options from manual mode to P1 to P12 automatic
programs. Manual mode is the system defaulting running mode.
3. Mode key
1
