10
Heavyweight use (use more than 7 hours a week) once every half month.
1.In order to better safeguard your electric treadmill and extend the life of the machine, it is
recommended that after your continued use of two hours, turn off the machine and let it rest for 10
minutes before using again.
2.If the treadmill belt is too loose, there will be skid phenomenon while running; if it’s too tight, it
may reduce motor performance and harden the abrasion of roller and the running belt. You can lift
two sides of the running belt for 50-75mm when the tightness is appropriate.
Running with adjusted alignment and tightness
In order to better use the treadmill and make the treadmill functions work better, it is necessary for
you to adjust the running belt into the best condition.
Running Belt alignment
Put electric treadmill flat on the ground.
Make the electric treadmill run at a speed of about 6-8km/hour.
If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn counter-
clockwise, then rotate the left adjusting bolt with 1/2 turn clockwise. (Picture B)
If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn counter-clockwise,
then rotate the right adjusting bolt with 1/2 turn clockwise. (Picture A)
Picture A Picture B
Multi-wedge Belt Tension Adjusting
When you use the treadmill for a long time, the multi-wedge belt becomes loose because of the
abrasion, then you have to do some appropriate adjustment to facilitate the safe use.
Judgment: the feeling of running with the occasional pause phenomenon, which indicating that the
treadmill belt or multi-wedge belt are a little loose and further affirmation need to be made.
Method of judging which part is loose:
Step 1
: Remove the four screws on protective cover, make the treadmill run at a speed of 1 km/h, and
then stand on the running belt, grip the armrests, and tread the treadmill belt slightly. (we advise
treading the treadmill belts with the user's own weight)
A.
The instantaneous step cannot stop the belt, the tightness is appropriate.
B.
If your instantaneous step stops the running belt, but the multi-wedge belt and former roller is still
running, it indicates that the running belt is loose and appropriate adjustments must be made to
facilitate the safe use
C.
If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but
the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments
must be made to facilitate the safe use
Step 2
: Use a wrench to adjust the screws on the motor base according the the condition. Meanwhile,
gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can
