5
2. Remove the pre-installed screws M8*22. Use 5# hexagon wrench and screw M6*12 to lock and
fix the base with the hole sites. Then install screw M8*22 back.
3.
Hold left & right columns, use 5# hexagon wrench and screw M8*55 to lock the console frame on
the columns (Tighten all screws in above steps, and please notice not to clamp the cable by column).
4.
Put the handle covers on the handle.
5.
Adjust the angle of the console.
M6*12
M8*22
M8*55
