Configuration
CONFIGURATION EXAMPLES
1. Connect the phone to the power supply
WITHOUT wiring the buttons.
2. Set the command 12 with the keyboard in the
following sequence:
E. Configure type of pushbutton B1 to NC:
Default value
NO
Button B1 (cabin
alarm):
set
pushbutton type to
NC
Button B2 (
Maintenance
alarm button / end of
alarm): set pushbutton
type to
NO
3. Exit the programming mode.
Disconnect the power.
5. Mount the wired buttons.
Type of buttons:
Normally Open (NO)
Normally Closed (NC)
Programming command:
*12#n
1
n
2
n
1
= 0 (NO) n
2
= 1 (NC)
Default values=00
24
MEP2L M3.0-S1.4 EN
2020 Merak Telsis SL. All rights reserved
