Configuration
1) Configuration with keyboard
The integrated keyboard on the
back of the MEP2L allows quick
configuration of the device. Press
and hold 3 seconds to go in
and out of the programming mode.
CONFIGURATION INTERFACES
2) Remote configuration with voice call
- Dial the telephone number of the MEP2L and
wait for the pick up and the voice prompt "Enter
command".
- Enter the commands with the keyboard and start
the configuration.
3) Configuration with MERak Software
The device can be configured at the office,
before installation, or at the installation itself,
with an FTDI TTL-232 cable supplied by Merak.
3 sec
17
MEP2L M3.0-S1.4 EN
2020 Merak Telsis SL. All rights reserved
PSTN
