Merach MR-526D, Instruction Manual

Page: 17 / 26

E: 4 user-defined programs CUSTOM1~CUSTOM4 (Figure 17~Figure 20)
F:1 fat measurement program FAT (Figure 21)
2. The user's gender, height, weight, and age can be memorized after power off.
3. Use dot matrix characters to display main information.
4. Simulate ECG to display heart rate information.
5. SPEED (RPM), TIME, DIST, CAL, WATT (if any), heart rate PULSE, load value LEVEL are
displayed simultaneously in different areas.
6. The displayer shuts down automatically if there is no button operation for 4 minutes at
that time no speed signal and heart rate signal. But the current display state information
is saved, and the load is reset to the minimum. Operate any key or input speed signal, the
displayer will start automatically.
Button
1. ENTER key :
In the stop (STOP display) state, press the ENTER key to enter the function program and
set the function value. The selected window will be flashing.
Figure 17 Figure 18
Figure 19
Figure 21
Figure 22 Figure 23
Figure 20