Page 4 of 8
Data Sheet CPC3000
Touch screen operation
Main screen
The CPC3000 main operation screen appears after powering up the unit. This screen contains all of the controls needed to
navigate within the menus and to operate the instrument. The setup icon button opens up a menu that provides navigation to all
the set up screens, limits indication, tab selectable input menu, set point display and selection, pressure value indication, pressure
units indication and selection and measure / control / vent mode selection.
MEASURE
Measure mode pneumatically connects
the pressure sensor directly to the device
under test. In measure mode pressure
regulation is inactive.
CONTROL
In the control mode, the device
regulates the pressure output
according to the set point value,
providing a precise pressure at
the test port.
VENT
Vent mode vents the system and the
device under test to atmospheric
pressure.
Optional information can be displayed in the main menu by selecting the option in the setup menu
User defined DUT / control range limits
(configurable via SETUP)
* optional display element
Numeric keypad
Delete selected set point
Delete last entered digit
Accept selected set point
Setup Icon Button
Entered set point
Stable indication
Current pressure value
Pressure unit and mode
Bar graph
Mode
SETUP menu
The SETUP menu allows configuration
of the following points:
Language (17 currently available)
Maximum control range
Step and Jog functions
Interface setting
Display of additional information
SETUP
menu
Communication status*
Optional barometric refer-
ence display*
Jog key pad selection tab
User defined Jog
Step key pad selection tab
Numeric key pad selection tab
Note: See the following page for detailed information on
each set point entry screen.
