Communications
Page 7 of 8
The variety of communications modes and command sets make the CPC3000 a good choice to replace older pressure controllers
that communicate remotely via IEEE-488. The Mensor command set will integrate seamlessly with other Mensor controllers and the
SCPI command set provides integration in areas where the SCPI command structure has been used. The CPC3000 even understands
commands and automation programs that have been written previously for non-Mensor / non-WIKA controllers. Within the setup
menu, under the remote tab, communication emulation selections are available to switch between the various command structures.
In addition to IEEE-488, the CPC3000 has Ethernet and USB communications making it remotely accessible to today’s modern
automation systems. Trouble shooting the initial remote setup is made easy by viewing the remote monitor which displays the most
recent commands sent and responses from the CPC3000 plus any error messages.
Options and accessories
Barometric reference
An optional barometric reference is available for emulation of gauge pressure when the internal sensor is absolute and emulation
of absolute pressure when the internal sensor is gauge. The internal gauge sensors must include a negative gauge range of one
atmosphere in order to be able to emulate sub atmospheric absolute pressures.
Rack mount kit
A 19” x 3U rack mounted tray is available.
Pressure adaptor fittings
Customized calibration systems
