15
Functional description of operating mode
Energy Manager
Start of charging
process
Without RFID card:
Automatically after connection to the vehicle
With RFID card:
Authentication with valid RFID card
Manually by selecting a valid RFID card in Charge APP.
Controlling the charging
process
By using the "SUNNY HOME MANAGER":
The "SUNNY HOME MANAGER" specifies the charging current according to the parameters
set in the Charge APP.
See Chapter 4.4.1 "Settings in operating mode "Energy Manager"" on page 17.
By using the Charge APP:
Terminating the charging process (stop)
Changing the remaining amount of charging energy.
Changing the remaining charging time.
Changing the distribution of solar energy (enable / disable excess charging).
By using the multi-function button:
Terminating the charging process (stop)
The stop function with the multi-function button must be enabled during the setting-up
process.
With RFID card:
Terminating the charging process (stop, with the same card used for starting the charging
process)
In operating mode "
Energy Manager
", all functions in operating modes "
Time-
Controlled (internal)
" and "
External Tariff Signal
" are suspended. The charging power,
for example, will not be controlled over the internal timer or external tariff-switching signal.
