Mendota X-62, Installation And Operating Istructions

Page: 11 / 22

11
Figure 9 (continued)
Place rear log #1 on the grate with its left end against the feft firebox wall (or against the optional firebrick
panel, if used). The right end should rest on top of the grate bar, as shown. Make sure that the log is
tight against the back of the firebox.
Place the notch on log # 2 over the left grate bar. Slide log # 2 back against the tabs that are located on
the top of the grate bars.
Place log # 7 against the right grate bar, with its front resting on the grate cross bar. Position the log so
that the locating pin hole faces up.
Figure 9 (continued)