Using the BL50S with MDIS5 Software
MEN Mikro Elektronik GmbH
69
20BL50S00 E2 – 2014-12-10
Interface Multiplexer (mux_if2)
The interface multiplexer 2 is used to switch the serial interface 2 (X2) from UART
to CAN (required if you want to use the SA8 SA-Adapter in this slot).
Table 24.
Interface Multiplexer 2 truth table
:
The interface is switched using the following commands:
For Windows:
For Linux:
Interface Multiplexer (mux_if0)
The interface multiplexer 0 is used to change the serial interface 1 (X1) from UART
(default setting) to SGPIO (required if you want to use the SA15 SA-Adapter in this
slot).
Table 25.
Interface Multiplexer 0 truth table
:
The interface is switched using the following commands:
For Windows:
For Linux:
Interface
Function
mux_if2
SA1
UART1
0
CAN2
1
z17_io z17_2 -p=5 -s=1 -h
z17_io gpio_2 -p=5 -s=1 -h
Interface
Function
mux_if0
SA0
UART0
0
SGPIO
1
z17_io z17_2 -p=6 -s=1 -h
z17_io gpio_2 -p=6 -s=1 -h
