Functional Description
MEN Mikro Elektronik GmbH
47
20BL50S00 E2 – 2014-12-10
Fix the hard disk by tightening the four M3x5 countersink screws (highlighted
in red in the following picture, screws are included in the box PC delivery).
Slide the shuttle back into the housing and close the handle.
3.4.4
DRAM System Memory
The standard model of the BL50S is equipped with 2 GB of DDR3 SDRAM. Up to
4 GB are supported. The graphics controller of the BL50S has no own memory and
so uses 256 MB of the system memory by default. Other values can be set using a
BIOS item in the sub-menu Video Configuration (possible settings 64 MB, 128 MB,
256 MB or 512 MB).
3.4.5
Boot Flash
The BL50S is equipped with a boot Flash containing its BIOS.
3.4.6
SD Card Slot
Within its housing, the BL50S provides one SD card slot. The slot supports the
Secure Digital 2.0 specification (SDHC) with a storage capacity of 2 up to 32 GB
and a data transfer rate of 25 MB/s.
3.4.7
mSATA Slot
Within its housing, the BL50S provides one mSATA slot.
See
Chapter 2.2.5 Installing an SD Card on page 32
for information on how to
install the SD card.
See
Chapter 2.2.6 Installing an mSATA Drive on page 32
for information on how to
install an mSATA disk.
