Getting Started
MEN Mikro Elektronik GmbH
35
20BL50S00 E2 – 2014-12-10
2.3.1
Installing the BL50S in a 19" Rack
MEN offers a 1.5U mounting kit which makes it possible to install the BL50S in a
19" rack (05BL01-00).
Remove the BL50S’s bottom panel as described in
Chapter 2.2.2 Opening the
BL50S on page 25
.
Remove five of the screws fastening the front panel (highlighted in red in the
following picture). Do not remove the front panel.
Install the two heats sinks supplied with the kit at the sides of the BL50S using
four M2.5x10 TX8 Torx screws for each heat sink. The screws are included in
the delivery of the 05BL01-00 kit.
Insert the box PC into the opening in the kit’s front panel.
Please see MEN’s
website
for more information.
