Getting Started
MEN Mikro Elektronik GmbH
25
20BL50S00 E2 – 2014-12-10
2.2.1
Handling Internal Components
2.2.2
Opening the BL50S
The PCI Express Mini Cards, the SA-Adapters, the microSIM cards, the mSATA
slot and SD card slot of the BL50S can be accessed after opening the housing.
For this purpose, remove the system’s bottom panel fixed by ten M3x8 TX8
Torx screws.
Figure 6.
Screw positions on the bottom of the BL50S
To access the SD card slot, remove the rear panel of the unit fixed by six M3x8
TX8 Torx screws.
•
Switch off or unplug the power supply of the box PC before working
on internal components.
•
Please observe the instructions concerning electrostatic discharge
whenever you work on the inside of the computer system. See
Chapter Electrostatic Discharge (ESD) on page 10
.
!
