Memotec NetPerformer SDM-9120 Series, Hardware Installation Manual

Page: 147 / 161

Memotec Inc. B-9
Marking
The SDM-9120 UAC, SDM-9220 UAC and the SDM-9230 UAC bear the following CE
mark:
Intent of Use and Network Compatibility
Item Compatible Telecom Services
The SDM-9120/9220/9230
unit with the appropriate
DTE cables
This telecom Equipment is intended to be connected to the
following telecom services:
• X.21, V.24, V.35 or V.36 Leased Circuits, in all the
countries listed below:
• Packet Switched Data offering X.21, V.24, V.35 or V.36
physical interface, in all the countries listed below:
Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Republic of Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, United Kingdom
The SDM-9220/9230 with
Interface Card P/N 100-
1126-001 or -501 (Dual
Serial)
This telecom Equipment is intended to be connected to the
following telecom services:
• X.21, V.24, V.35 or V.36 Leased Circuits, in all the
countries listed below
• Packet Switched Data offering X.21, V.24, V.35 or V.36
physical interface, in all the countries listed below:
Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Republic of Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, United Kingdom
Table B-1 Compatible Telecom Services