14
Operation
Feeder type selection list (1).
Yarn feed rate per feeder revolution (2).
Number of teeth on feeder toothed pulley (3).
If a feeder is not on the feeder list (1) you must enter the
yarn feed rate per feeder revolution (2) and the number
of teeth on the toothed pulley (3) using the touchpad.
1
3
2
You cannot modify the default settings for the MPF, MER B,
MER C and MCF feeders.
Set the direction of rotation of the toothed belts during
configuration.
InfOrMATIOn!
The direction of rotation should be the same as
that of the knitting machine toothed belts.
i
