9
Assembly
2
1
3
5
7
4
8
InfOrMATIOn!
To loosen the cone clamp, unscrew the screws
by a few turns.
Unscrew and remove two of the screws and then
screw them into the two bores by the same amount.
This will force the outer cone shell out of the inner
shell and thus release the connection.
i
fitting the MrA 2 motors
Attach the MRA 2 motors (7) to the motor flange (3) with
the cheese head screws (5). Adjust the toothed pulley (2)
with the cone clamping element (1) to the same height as
the tension roller (4) on the drive shaft (6) of the MRA 2
motor (7).
Fix the MRA 2 motors (7) with the motor flange (3) to the
feed ring (8) of the machine.
InfOrMATIOn!
In order to prevent vibrations on the feeder ring,
the MrA 2 motors should be mounted close to
a ring support bracket wherever possible.
i
3
6
7
