10
Assembly
fitting the toothed belts
The motor flange tension roller (1),
the MRA 2 motor
toothed pulley (2) and the feeder toothed pulley must
all be adjusted to the same height. This is ensure that
the toothed belts do not run up against the flanks of
the tension rollers; belts will be damaged if they run
up against the flanks.
Do not kink or twist the toothed belts.
fitting the GT 3 console
Fit the GT 3 console to the motor flange of the MRA 2
motor.
The GT 3 console can also be fitted to a bar.
Fitting the tensioning device
Fit the tensioning device to the feeder ring.
CAuTIOn!
The MrA 2 should only be used with an
unsprung tensioning device.
!
1
2
