12
Access level menu
No access permitted.
Access level 1 for knitting machine operators with
password “2810”. Users at this level can modify the
yarn feed rate per machine revolution, modify the
reduction factor
in the fabric press-off rectification
mode and modify the number of machine revolu-
tions.
Access level 2 for machine setters with password
“72280”. Users at this level can configure the encoder,
the number of teeth on the MRA 2 motor toothed
pulley, the feeder direction of rotation and the unit
of measurement (metres or inches) used.
Operation
Layout of GT3 console display
Device information about the control unit and the
MRA 2 motors
Configure MRA 2 system
Fabric press-off rectification
Access level menu
Fault or status message
Console
Exit menu
Next page
The fields with a yellow background can be set accord
-
ingly.
InfOrMATIOn!
Before you can make any changes You must
enter a valid password.
i
Enter a valid password.
