background image

 

 

13

General Information and Instructions 

Your new Member’s Mark Grill Island has been designed and manufactured to high quality standards.  It will 
provide you with many years of enjoyment with a minimal amount of maintenance.  Please keep in mind the 
following 

FOR YOUR SAFETY

 

OPERATION 

1.

 

Your gas grill requires reasonable care during operation.  It will be hot during cooking and cleaning.  
You should never leave the grill unattended or move the grill when in use. 

2.

 

Children should never use your gas grill.  Keep younger children and pets away when in use. 

3.

 

Only use your gas grill outside in a well-ventilated area.  Never use indoor in any building, garage, shed, 
or under any type of flammable canopy or overhang. 

4.

 

Ensure your grill is on level ground and the locking casters are locked before use. 

5.

 

Turn all gas valves off should the burners go out when cooking.  Open the lid and wait 5 minutes before 
relighting. 

6.

 

Do not lean over the grill or touch the edges of the firebox or lid when in use. 

7.

 

Turn the burners off, close the lid, and shut off the LP cylinder should a grease fire occur. 

8.

 

Do not obstruct the flow of combustion and ventilation air to this grill. 

9.

 

Keep the ventilation openings of the cylinder enclosure free and clear from debris. 

10.

 

Keep the outdoor cooking gas appliance area clear and free from combustible materials, gasoline, and 
other flammable vapors and liquids. 

11.

 

Do not put a grill cover or other flammable material in the storage area of this grill. 

12.

 

Do not use charcoal briquettes, lava rock, or any type of ceramic product in this grill. 

 

LP Gas and Cylinder Information 

Your new gas grill operates on LP (Liquid Propane) Gas.  It is odorless, colorless, and non-toxic when produced.  
You can smell LP gas as it has been given an odor similar to rotten cabbage for your safety.   
 
Your grill uses the newest and safest LP Gas Cylinder. 

1.

 

A listed O.P.D. (Overfill Protection Device) must be used.  This prevents 
accidental gas leaks caused by overfilling of the tank.  Each tank contains 
a float that closes the input valve when the tank is 80% full.  This allows  
room for the LP gas to expand in hot temperatures.  A triangular hand  
wheel distinguishes this type of tank. 

2.

 

O.C.C.1 Type 1 Quick Connect Valve – provides fast tank hook-ups and requires only to be tightened by 
hand.  Large external threads on the outlet part of the valve distinguish this. 

In addition, the LP tank you use with your grill must meet the following requirements 

1.

 

Required Measurements:  12-1/2” (317mm) in diameter and 18-1/2” (472mm) in height. 

2.

 

20-pound (9.1kg) propane cylinder. 

3.

 

Constructed and marked with U.S. Department of Transportation (D.O.T.) for the US or CAN/CSA-
B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission, for 
Canada.

 

4.

 

A safety release valve.

 

5.

 

A means for vapor withdrawal.

 

6.

 

A collar to protect the tank valve.

 

7.

 

A bottom ring for mounting. 

Triangular Hand Wheel

 

WARNING 

Do not attempt to use a cylinder with any other type of connection device. 

!

 

Summary of Contents for B08SMG-1




























Reviews: