Interfaces
Rev 1.2
Mellanox Technologies
40
• To reset the system and the CPU of its management board, push the Reset button and
keep it pressed for up to 15 seconds.
• To reset the system, the CPU of its management board and the “admin” password, push
the Reset button and keep it pressed for at least 15 seconds. You will then be able to
enter without a password and set a new password for the user
“admin”
.
In the externally managed systems the Reset button resets the device.
4.2
LEDs
4.2.1
LED Notifications
The system’s LEDs are an important tool for hardware event notification and troubleshooting.
Table 12 - LEDs Symbols
Symbol
Name
Description
Normal Conditions
System Status LED
Shows the health of the system
Green/Flashing
green when booting
Fan Status LED
Shows the health of the fans
Green
Power supply units
LED
Shows the health of the power supply units
Green
Bad Port LED
Lights up when a symbol error is detected on one
of the ports.
Off
*
*Unit Identifier LED Beacon LED, lights up on command through the
CLI
Off or blue when
identifying port
*This function is currently disabled.
Summary of Contents for SB7700
