background image

Transport, storage and disposal

94

ENGLISH

11  Transport, storage and disposal

11.1  Venting the appliance

We recommend venting the appliance when it is not used for a long while, 
prior to transport and when there is a risk of frost. 

During venting, remaining water is removed from the appliance.

Requirement:

 The ready symbol appears on the display.

1.  Press the "menu/ok" button for 2 seconds.

 

»

The menu appears on the display.

2.  Navigate to the 

System

 > 

Venting

 menu.

3.  Select 

Start

 using the arrow buttons and conirm with "menu/ok".

4.  Follow the further instructions on the display.

 

»

The appliance switches of.

11.2  Transporting the appliance

ATTENTION

Freezing remaining water may damage the appliance.

 

ƒ

Prevent the appliance from being exposed to temperatures below 0°C.

Information

Transport the appliance in the original packaging. This avoids damage in 
transit.

Before transporting the appliance, carry out the following activities:

1.  Vent the appliance (see chapter  11.1 

Venting the appliance

 on 

page 94).

2.  Empty the drip tray and the cofee grounds container.
3.  Empty the water tank.
4.  Empty the bean container.
5.  Clean the appliance (see chapter  9.1 

General cleaning

 on page 85).

6.  Secure loose parts (cup plate, etc.) with suitable adhesive tape.

7.  Package the appliance.

Summary of Contents for Caffeo Barista T

















































Reviews: