Care and maintenance
87
ENGLISH
4. Rinse the entire brewing unit thoroughly from all sides under running
water. Make particularly sure that cofee residues are removed from the
sieve
5. Allow the brewing unit to drip dry.
6. Use a soft, dry cloth to remove cofee residues from the surfaces inside
the appliance.
7. Insert the brewing unit into the appliance. Press and hold the red lever
on the brewing unit handle and turn the handle counter clockwise until
it engages at the stop.
8. Close the cover. To do this, insert the bottom of the cover into the appli-
ance and swing it up until it engages.
9.4
"Easy Cleaning" programme
The milk system is rinsed using the "Easy Cleaning" programme.
Each time after preparing a beverage with milk, the appliance requests you
to execute the "Easy Cleaning" programme.
You can also run the "Easy Cleaning" programme manually.
Requirement:
The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for 2 seconds.
»
The menu appears on the display.
3. Navigate to the
Care
>
Easy Cleaning
menu.
4. Use the arrow buttons to select
Start
and conirm with "menu/ok".
5. Follow the further instructions on the display up to the end of the "Easy
Cleaning" programme.
»
The ready symbol appears on the display.
9.5
"Cleaning milk system" programme
With this programme, the milk system is cleaned using a milk system clean-
ing agent.
To maintain hygiene and avoid damage to the appliance, we recommend
carrying out the cleaning programme once a week.
The cleaning programme takes approximately 3 minutes and should not be
interrupted.
