25
STORAGE
• Ensure that the appliance is clean,
dry and completely cool before
storing it.
• Store the appliance in a clean and
dry place, for instance in its box.
• Do not place anything on top of
the appliance as this could scratch
the non-stick coating.
• The cord must not be twisted or
wound around the appliance.
CLEANING
When cleaning the appliance, you
should pay attention to the following:
• Remove the plug from the wall
socket and allow the appliance to
cool down before cleaning.
• Do not immerse the appliance,
cord or plug in water and make
sure no water enters the appliance.
• Clean the appliance by wiping
it with a damp cloth. A little
detergent can be added if the
appliance is heavily soiled.
• The parts are not dishwasher safe.
• Never use a scouring pad or any
form of strong solvent or abrasive
cleaning agent to clean the
appliance, as those may damage
the inside and outside surfaces of
the appliance.
• IMPORTANT! Allow to dry
completely after cleaning. Do not
use the appliance if it is damp.
• Always clean the appliance before
putting it away if it is not to be
used for a prolonged period.
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363
13-amp plug. If you have to replace
the fuse, only those that are ASTA or
BSI approved to BS1362 and with a
rated current of 13 amps should be
used. If there is a fuse cover fitted, this
cover must be refitted after changing
the fuse.
If the fuse cover is lost or damaged,
the plug must not be used. You must
also check if the socket outlets in your
home fit with the plug of the appliance.
If the socket outlet in your home does
not fit with the plug, the plug must be
removed and disposed of safely as
insertion of the plug into the socket
is likely to cause electric hazard. A
replacement plug should be wired
according to following description.
Important
This appliance must be earthed. The
wires in the cord set are coloured
thus:
BLUE- Neutral, Brown-Live, Green&
Yellow-earth (For detachable plug
only)
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
The wire that is coloured Green&
Yellow must be connected to the
terminal in the plug that is marked
The wire that is coloured blue must
be connected to the terminal that is
marked with the letter N or coloured
black.
Summary of Contents for 16250016
Page 32: ...32 ...
