7
GB
Technical data
Light chain + mains adapter:
Total power
consumption:
4.4 W
LED Fairy Lights
1
:
Operating voltage: 4.5 V
LEDs:
80 LEDs, 3 V (LEDs are
non-replaceable), total 2.1 W
Protection system: IP44 (Splashproof)
LED Fairy Lights (Model No. HG05406A/
HG05406C) GS certified.
LED Colour:
HG05406A: warm white
HG05406C: cold white
Mains adapter
4
:
Nominal voltage
primary:
220–240 V∼, 50-60 Hz
Nominal voltage
secondary:
4.5 V
, 3.6 W
Protection system: IP44 (Splashproof)
Protection class:
Mains adapter (Model No.
JT-DC4.5V3.6W-H4-IP44) GS certified.
SELV:
Safety extra low voltage
Ta:
Maximum rated ambient
temperature
Tc:
Rated maximum operating
temperature of the case of a
controlgear
Safety information
In the case of damage resulting from non-compli-
ance with these operating instructions the guarantee
claim becomes invalid! No liability is accepted
for consequential damage! In the case of material
damage or personal injury caused by incorrect
handling or non-compliance with the safety in-
structions, no liability is accepted!
DANGER
OF DEATH AND ACCIDENTS
FOR TODDLERS AND CHIL-
DREN!
Never leave children unsupervised
with the packaging material. The packaging
material represents a danger of suffocation.
Children frequently underestimate the dangers.
Please keep children away from the product
at all times.
This product is not a toy and should not be
played by children. Children are not able to
understand the dangers that can occur when
handling this product.
This product can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabili-
ties or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the product in a safe
way and understand the hazards involved.
Children shall not play with the product.
Cleaning and user maintenance shall not be
made by children without supervision.
Ensure that the product is installed by suitably
experienced or qualified persons only.
CAUTION! RISK OF OVERHEATING!
Do not operate the product
inside the pack-
aging.
After use, keep the product in the packaging
to prevent unwanted damage.
Do not pull the product cable and make sure
it is laid down properly so that no one walks
or trips over it.
The product can be used on all surfaces
officially classified as being of “normal flam-
mability“.
Do not attach any other objects to the product.
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage
available is the same as the required operat-
ing voltage for the product (220–240 V∼).
Before connecting the product to the mains
you should always check the product for any
damage.
