31
Chapter 3 Advanced Usage
5
Press the Up/Down buttons (
) and select “Network”, then press the Menu/Enter button (
).
6
Press the Up/Down buttons (
) and select “Player Port”, then press the Menu/Enter button (
).
7
Press the Up/Down buttons (
) and select “Isolated Mode”, then press the Menu/Enter button (
).
8
Press the Menu/Enter button (
).
Note:
To connect the N10/N100 and the Network Audio Player to the network via the router or hub, use network
mode instead. Select “Bridged Mode” at step 7 above to use network mode.
Formatting Drives
To format an internal drive in the N10/N100 or connected USB drives, follow the procedure below. This section
explains the procedure for formatting an internal drive as an example.
Formatting will delete all data on the
drive. If needed, back up any data before continuing.
This procedure will format a USB drive connected to the USB 2.0 port. This will format the USB drive to NTFS. Be
aware that a USB drive formatted to NTFS will become read-only when connected to a macOS device.
Note:
Connect only one USB drive at a time when formatting it.