User Manual - Vacuklav
®
30-B
Page 21
6.3.1.2 Connection to an external PC
6.3.1.2.1 Installation
Records and archives can also be kept by using an external PC. This requires a suitable connection between
the serial port of the PC and the printer port of the autoclave.
For data transfer and data processing you must first install the program MELAwin
®
on the PC.
6.3.1.2.2 Downloading to a PC
After connecting the autoclave to a PC the print-out option for "External PC" must be selected. Proceed as for
an external printer (see Section 6.3.1.1.2), but under Point 5 use the "+" or "-" button to select the "External
PC" option.
6.3.1.3 No
printer
In order to select the option "No printer", proceed as described as in Section 6.3.1.1.2. Under Point 5,
however, use the "+" or "-" button to reach the setting "No printer".
6.3.2
Immed. print-out? Yes/No
When an external printer is fully installed, a print-out can be produced automatically at the end of each
program run by selecting the following options after switching on the autoclave:
Operation
Display message
1. Hold down "+" button
and also press "-"
button.
Select "Function"
menu, sub-menu "Print"
2. Press
"Program"
button,
Select "Print" menu
sub-menu "File
transmission"
3. Press "+" button, select
sub-menu "Immed.
print-out?" Display
shows current option,
here e.g. "No"
4. The button "Program"
can be used to switch
between "Yes" and
"No" Press "Program"
button,
Select "Yes" option
5. Press
"Start-Stop"
button,
Confirm the setting and
return to "Function"
menu, sub-menu "Print"
6. Press
"Start-Stop"
button,
Quit the "Function"
menu and return to the
initial display
Program Start-Stop
I m m e d . p r i n t o u t
N o
Program Start-Stop
I m m e d . p r i n t o u t
Y e s
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
1 4 : 2 7 : 3 0
0 . 0 2 b a r 2 5 ° C
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
P r i n t
F i l e t r a n s m i s s i o n
