Page
20
6.3.1.1.2 Initialising the printer
After connecting the printer to the autoclave it must be registered with the autoclave processing unit
(initialised). Proceed as follows:
Operation
Display message
1. Switch on autoclave
Display shows time,
pressure and
temperature
2. Hold down "+" button
and also press "-"
button.
Select "Function"
menu, sub-menu "Print"
3. Press
"Program"
button,
Select "Print" menu
sub-menu "File
transmission"
4. Press
"Program"
button,
Select "Data transfer"
Display shows current
status e.g. "No printer"
5. Press "+" (or "-") button
until display shows
"External printer"
6. Press
"Program"
button,
Confirm the setting,
return to "Print" menu
7. Press
"Start-Stop"
button,
return to the "Function"
menu
8. Press
"Start-Stop"
button,
Quit the "Function"
menu and return to the
initial display
Program Start-Stop
1 4 : 2 7 : 1 2
0 . 0 2 b a r 2 5 ° C
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
P r i n t
F i l e t r a n s m i s s i o n
Program Start-Stop
F i l e t r a n s m i s s i o n
N o p r i n t e r
Program Start-Stop
F i l e t r a n s m i s s i o n
E x t e r n a l p r i n t e r
Program Start-Stop
P r i n t
F i l e t r a n s m i s s i o n
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
1 4 : 2 7 : 3 0
0 . 0 2 b a r 2 5 ° C
