Page 30
6.6 Total
load
count
_____________________________________________________
The Vacuklav
24-B/L keeps a running count of the total number of loads sterilized, and this be displayed as
follows:
Operation
Display message
1. Hold down "+" button
and also press "-",
Select "Function"
menu,
submenu "Print"
2. Press "+" (or "-") until
the display shows the
submenu "Load count".
3. Press "Program", the
display shows the
current total load count,
e.g.:
4.
Close by pressing
"Start-Stop", and return
to the "Function" menu,
then
5. Press
"Start-Stop"
again to return to the
starting point
6.7 Program
modifications
_______________________________________________
The standard programs are designed to meet most practical operational needs (subatmospheric pulsing,
heating, sterilization, pressure release, drying, and ventilation) and to display the parameters of most interest
(pressure, temperature, time).
The operator is responsible for ensuring that the autoclave is not overloaded, and that the load is arranged
properly to ensure good drying.
There are two standard options "Automatic preheating" and "Additional drying".
Any further program modification to suit specific individual requirements should only be carried out by
authorised personnel, after consultation with your dealer or with the experts at MELAG.
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
F u n c t i o n :
S u m b a t c h n u m b e r
Program Start-Stop
S u m b a t c h n u m b e r
3 6 7
Program Start-Stop
F u n c t i o n
S u m b a t c h n u m b e r
Program Start-Stop
1 4 : 2 7 : 1 2
- 0 . 0 2 b a r 2 5 ° C
