5 Settings
18
PLEASE NOTE
Even if the label printer does not print a label (because the steam sterilizer needs to
search for the label printer after being activated) performing the calibration procedure
can resolve the problem.
Resetting to the factory settings
Only reset the label printer settings in exceptional cases. When resetting to the factory settings, the pre-
programmed IP address will be replaced by the factory settings saved in the device see:
Technical data
[
}
page 22].
1.
Open a web browser and enter
http://192.168.40.160
in the address bar to access the website of the label
printer.
2.
If you do not know the IP address of the label
printer, it can be read out, see section:
Reading out
the label printer configuration (print self-test)
[
}
page 17].
3.
Working in the
Configure interface
menu,
click on the [Restore Default] pushbutton.
Ê
Afterwards, the IP addresses have been reset
to the factory settings.
Summary of Contents for MELAprint 60
Page 2: ......
