4 Commissioning
16
5.
Then select [Reboot] from the left-hand navigation
bar.
Connecting the label printer in the practice network
1.
Disconnect the Ethernet cable from the computer and connect the cable directly to the steam sterilizer
integrated in the network, or to a free network socket.
2.
The IP address
192.168.40.100
can be returned to the original IP address after configuration.
Method 3: Connecting in MELAtrace
NOTICE
Arrange for the IT company that services your network to integrate your label printer in
the network.
To enable the label printer to be found in the search by MELAtrace, the label printer must be installed in
the same subnetwork as the computer on which MELAtrace is installed. The factory setting of the label
printer IP address is
192.168.40.160
.
Printing a test page
PLEASE NOTE
To save labels, we recommend inserting the roll with the wider labels to print menu items
and settings.
n
Adapt the width of the paper guide using the adjustment wheel.
You can print the main menu as a test page.
1.
Hold the FEED button depressed and switch on the label printer simultaneously.
Ê
The label printer prints the main menu.
2.
To leave the "Main menu“, press the FEED button 1x short and 1x long.
For further information regarding the sub-menus, see section
Main menu
[
}
page 17].
Daily operation
In daily operation, first switch on the label printer and then the steam sterilizer. This ensures that the label
printer is immediately recognized as an output medium.
The label printer should remain switched on during operation of the steam sterilizer in order to ensure
faultless communication between steam sterilizer and label printer and to avoid repeated calibration after
reactivation.
Summary of Contents for MELAprint 60
Page 2: ......
