MEITRACK T366 User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 10 -
Power supply
DC 9–90 V/1.5 A
Power consumption
Current in standby mode: 65 mA
Operating temperature
-35°C to 80°C (without battery)
Operating humidity
5% to 95%
LED indicator
Green indicator showing the GSM signal
Blue indicator showing the GPS signal
Button/Switch
1 upgrade button (used to manually upgrade the firmware)
1 power button
Memory
8 MB buffer
Sensor
3-axis accelerometer (used to wake the device up by vibration and detect towing
alerts, harsh acceleration alerts, and harsh braking alerts)
Frequency band
GSM: 850/900/1800/1900 MHz
GPS sensitivity
-165 dB
Positioning accuracy
2.5m
I/O port
2 digital inputs and 1 analog detection input (0–30 V; selectable positive, negative,
and analog detection inputs)
1 output
1 USB port
1 1-wire interface (set to an output or a negative input)
1 output (voltage: 5V)
1 RS232 port (T366 RS232 version): GND/TX/RX
Microphone/Speaker
External (optional)
3.3
Product Versions
Product Model
GPS Antenna
RS232
Two-Way
Calling
Hardware
Version
Remarks
Main
Model
Product
Version
T366
T366
Internal
Not support
Not support
H1.1
Basic version
T366_F1
External
Not support
Not support
H1.1
External GPS antenna
version
T366_F2
Internal
Support
Not support
H1.1
RS232 version
T366_F3
External
Support
Not support
H1.1
External GPS antenna &
RS232 version
T366_F4
Internal
Not support
Support
H1.2
Two-way calling version
T366_F5
Internal
Support
Support
H1.2
Two-way calling & RS232
version
4
T366 and Accessories
T366 and standard accessories:
T366 tracker (with a cable of 50 cm in length)
