background image

MEITRACK T366 User Guide                                                                                                   

 

Copyright ©  2018 Meitrack Group All rights reserved.                                                                                                - 23 - 

Arming state 

Press once 

The buzzer will  make  a  sound, indicating  that  the  device  is  in 

arming state. 

2: Disarm key 

Arming state 

Press once 

The buzzer will make two sounds, indicating that the device is 

in disarming state. 

Disarming 

state 

Press once 

The buzzer will make two sounds, indicating that the device is 

in disarming state. 

 

Note: The buzzer connects to the 1-Wire interface (green cable), which needs to be set to output 2. 

8.1.4

 

Connecting the Microphone and Speaker 

Connect the speaker to the green audio cable, and connect the microphone to the red audio cable, as shown as the 

following figure. 

 

 

8.2

 

Mounting the T366 

Mount the device in the vehicle by cable tie. 

Note: Do not install it at a metal covered place. 

If you have any questions, do not hesitate to email us at [email protected]

Summary of Contents for T366
























Reviews: