67
• Avoid frequent jams when driving
screws.
• The charger may only be connect-
ed to the voltage source specified
on the type plate.
• Only recharge the battery using
the supplied charger.
• Protect both the charger and the
cordless drill/screwdriver from
moisture. Never submerge in
water!
• Do not use the charger out in the
open.
• To protect the rechargeable bat-
tery from damage, do not expose
it to temperatures over 40°C.
CAUTION! Do not shortcir
cuit the contacts on the bat
tery and charger!
• When recharging, pay attention to
the correct polarity „+/–“.
• Do not expose the rechargeable
battery to naked flames.
Explanation of the safety icons
The machine and the
charger may not be put
into the household
waste. Dispose of the devices in an
environmentally friendly way, if you
wish to dispose of them. Dispose of
the machine and the charger at a
local collection point.
Do not dispose of the
rechargeable battery in the
household waste.Dispose
of the rechargeable battery in an
environmentally friendly way, if you
wish to dispose of it. Dispose of the
rechargeable battery at a local col-
lection point.
Important!
Observe the
operating
instructions!
Important! Read
the operating
instructions for
the charger!
Voluntary „geprüfte Sicher-
heit“ seal of quality (tested
safety)
Voluntary „geprüfte Sicher-
heit“ seal of quality (tested
safety)
CE stands for “Conformité
Européenne”, which
means that it meets EU
directives. With the CE mark, the
manufacturer confirms that this prod-
uct corresponds to the applicable
European directives
Protection class II. Hous-
ing is double insulated.
This character symbolises
that this product complies with Pro-
tection Class II. This means that the
product is equipped with a rein-
forced or double insulation between
the power circuit and the output
voltage or metal housing.
MW-5451280-Bedien-2008.indd 67
MW-5451280-Bedien-2008.indd 67
26.08.20 09:07
26.08.20 09:07
