Meister 5404300, Translation Of The Original Instructions

Page: 85 / 160

GB
Operation
85
Disconnecting the pneumatic gun
C
1. Make sure that the on/off switch
1
is in position “
0
”.
2. Pull back the sleeve on the quick connector
3
.
3. Disconnect the pneumatic gun
6
.
Turning compressor on and off
1. Place the compressor on a suitable work surface.
2. Make sure that the on/off switch
1
is in position “ 0 ”.
3. Connect the pneumatic gun
6
to the compressor (see section “Connecting the
pneumatic gun”).
4. Plug the power plug into a correctly installed power socket.
5.
To turn on the compressor, set the on/off switch to the “ I ” position. You can read the
working pressure on the gauge
4
.
6. To turn on the compressor, set the on/off switch to the “ 0 ” position.
7. If you have finished using the compressor, unplug the power plug from the power socket.
8. Vent the compressor using the pneumatic gun by pressing the drain valve
5
.
9. Disconnect the pneumatic gun from the compressor.
10. Let the compressor cool completely.