Meinberg IMS LANTIME M500, Manual

Page: 75 / 132

12 Attachment: Technical Information
12.6.12.2 Available BPE Modules
BPE Type Connectors Signals Size
BPE-1040 4 x BNC female Out 1 - Out 4: TC AM 4HP
BPE-1060
1
4 x BNC female Out 1 - Out 4: DCF77 SIM 4HP
BPE-2000 4 x BNC female Out 1: PPS, Out 2: 10 MHz 4HP
Out 3: TC DCLS, Out 4: TC AM
BPE-2001 4 x BNC female Out 1: PPS, Out 2: 10 MHz 4HP
Out 3: TC DCLS, Out 4: TC DCLS
BPE-2010 4 x BNC female Out 1 - Out 4: PPS 4HP
BPE-2014 4 x BNC female Out 1 - Out 2: PPS 4HP
Out 3 - Out 4: 10 MHz
BPE-2016
2
4 x BNC Buchse Out 1 - Out 4: progr. Pulses_1 4TE
10 V
PP
an 50 Ω
BPE-2020 4 x BNC female Out 1 - Out 4: 10 MHz 4HP
BPE-2030 4 x BNC female Out 1 - Out 4: TC DCLS 4HP
BPE-2050 4 x BNC female Out 1 - Out 3: TC DCLS 4HP
Out 4: TC AM
BPE-2080 4 x BNC female Out 1 - Out 4: 2048 kHz 4HP
BPE-2090 4 x BNC female Out 1 - Out 4: progr. Pulses 4HP
BPE-2091
3
4 x BNC female Out 1 - Out 4: progr. Pulses_1 4HP
(1) When using the BPE-1060 module, important configuration parameters must be observed. In the web inter-
face, you must set the mode to DCF77 Marks in the "Clock → Programmable Pulse Outputs → Prog. Out 1"
menu. In the drop-down box "Signal" the setting Normal is to be selected. In the menu "Clock
→
Time Zone
→
Time Zone for external Outputs" the
Local Time Zone
must be selected.
If the corresponding time zone does not exist in this drop-down box, the time zone can be added manually
in the menu "System
→
Display
→
Edit Time Zone Table".
See BPE-1060 4 x SIM77
(2) The outputs can be set by jumpers. Possible options are: PPS, Time Code DCLS, PPO_0, PPO_1, PPO_2
and PPO_3. Default jumper setting of this card is 4 x PPO_0 (Progr. Output 1 in the web interface).
(3) All four outputs of this BPE module have to be configured via the upstream receiver. In the web inter-
face, the configuration of the output signals can be carried out via the menu "Clock → Programmable Pulse →
Prog. Out 1". Here the option "PTTI 1PPS" must be selected to get a pulse length of 20 µ s.
IMS - LANTIME M500 Date: 19th March 2020 69