2.3.5 General commands
Command/Feature
Description
Reset()
Puts all settings to predefined values.
Debug(object value)
Output of a value or message in the
Debug window.
LoadPreset(string file-
Name)
Loads presets.
Sleep(int timeMS)
Stops program execution for a certain time
(timeMS in milliseconds).
AutoScaleDisplay()
Scales the displays automatically.
2.3.6 Sampling
Command/Feature
Description
Run()
Starts the continuous measurement.
Single()
Starts a single measurement.
Stop()
Ends a continuous measurement.
IsRunning
Flags indicating whether a measurement is ac-
tive.
IsAborted Flag
Flags indicating whether a measurement has
been aborted due to an error.
ActiveChannels
Sets the active channels (CH1, CH2, CHBOTH,
DIGITALIO).
SampleCount
Number of measuring points for a measure-
ment.
SamplingDuration
Duration of a measurement in seconds.
SamplingMode
Operating mode (OSZILLOSCOPE or DATALOG-
GER)
TriggerMode
Triggertype ('M', 'T', 't', 'W', 'w', 'E', 'e', 'D', 'd', 'X',
'x')
TriggerLowerLimit
Lower trigger threshold in volts.
TriggerUpperLimit
Upper trigger threshold in volts.
TriggerPoint
Trigger position in percent.
TriggerChannel
Trigger channel (CH1, CH2)
AmplitudeCh1
Measuring range channel 1
AmplitudeCh2
Measuring range channel 2
