2.2.2 Standard Settings (Setup Menu)
The item „Options“ allows you to apply several standard settings.
The item „General“ allows you to define the following windows‘ ti-
tles.
Furthermore, the device to be used may be selected. This selection
is made by entering the serial number or a continuous index. If the
field remains empty, the first "found" MEphisto Scope will be used.
Via “FFT-window”, the window method to be used in the calculation
of the FFT analysis may be defined. The window type "Hanning" is
the standard type and should only be changed if you are knowledge-
able about the underlying mathematical procedures.
With “Driver”, the driver for the MEphisto Scope may be set. The
standard driver is FTDI and should only be changed if necessary. If
no hardware is available, a simulated input signal may be chosen by
selecting “Simulation”.
In the logging area, parameters for logging internal events may be
defined.
