Page 9
4.4
Operation
Select a cycle length and wash pressure by pressing
(next to the or arrows on the display).
Press
to begin the wash cycle.
During the wash cycle,
is lit in
green
, and the
display will read
OPERATION
. A
blue
progress bar
moves across the display to show the remaining time.
Fastest cycle,
lowest water
pressure
Medium cycle,
medium water
pressure
Long cycle,
highest water
pressure
4.6
Between Cycles
Between cycles, leave the door of the machine closed
to conserve heating energy and shorten recovery time.
During extended idle periods, the display may show
ECO-MODE
as the machine enters an energy-saving
standby mode. When a new cycle is started, the
machine will return to normal operation automatically.
4.7
Shutdown
At the end of the shift, press and hold
for 2
seconds, until the display shows the options
ACTION
and
SHUTDOWN MACHINE?
When prompted to
SHUTDOWN MACHINE?
, press the
next to the
check mark. The machine will
perform a shutdown cycle, and then automatically shut
itself off.
4.5
Interrupting a Wash Cycle
If it is necessary to stop the cycle before it completes,
press the
key once, or slowly open the door.
WARNING!
If the door is opened suddenly, hot water can
spray out of the dishwasher. Open the door
slowly
until the dishwasher stops operating.
If the cycle is stopped before it completes,
Cycle
interrupted
will appear on the display. To clear the
message, press the
key next to the
check
mark.
At the end of the cycle,
will change back from
green
to
blue
. Open the door to unload the dishrack.
Steam may escape when the door is opened; this is normal.
WARNING!
Use caution when handling hot dishes, glass-
ware and other items.
S
ECTION
4 - O
PERATION
