Page 2
T
ABLE
OF
C
ONTENTS
4. OPERATION .........................................
7
4.1 Location and Description of Controls ........ 7
4.2 Startup ....................................................... 8
4.3 Loading Guidelines ................................... 8
4.4 Operation................................................... 9
4.5 Interrupting a Wash Cycle ......................... 9
4.6 Between Cycles ........................................ 9
4.7 Shutdown................................................... 9
4.8 Low Detergent Indicator .......................... 10
4.9 Manual Water Change ............................. 10
5. CLEANING ..........................................
11
5.1 Daily Cleaning (or as required) ................ 11
5.2 Exterior Cleaning (as required) ................ 11
5.3 Deliming (as required) ............................ 12
6. TROUBLESHOOTING .........................
13
6.1 Operating Issues (no messages) ........... 13
6.2 Display Messages .................................. 13
1. INTRODUCTION ...................................
3
1.1 Overview of Equipment ............................ 3
1.2 General Safety Information ........................ 3
2. TRANSPORT AND SHIPPING ..............
3
3. INSTALLATION .....................................
4
3.1 Overview of Installation ............................. 4
3.2 Requirements Before Installation .............. 4
3.3 Uncrating, Positioning and Leveling ............ 5
3.4 Accessing the Utility Connections ............ 5
3.5 Priming the Detergent and
Rinse Aid Lines ......................................... 6
3.6 Checking for Correct Chemical
Concentration ............................................ 6
MEIKO reserves the right to change any specifications without notice at any time.
© 2017 MEIKO USA, Inc. All rights reserved.
MEIKO
• 1349 Heil Quaker Blvd. • La Vergne, TN 37086
Phone: (615) 399-6600 • (800) 55-MEIKO • Fax: (615) 399-6620
www.meiko.us
MEIKO M-iCLEAN DISHWASHERS HAVE BEEN DESIGNED
EXCLUSIVELY FOR THE WASHING OF DISHES, GLASSWARE, CUTLERY
AND KITCHEN UTENSILS IN A COMMERCIAL OR INSTITUTIONAL SETTING
AND MUST NOT BE USED FOR ANY OTHER PURPOSE.
MEIKO ACCEPTS NO RESPONSIBILITY FOR DAMAGE TO THE APPLIANCE, SURROUNDING
EQUIPMENT OR ENVIRONMENT THAT IS CAUSED BY INAPPROPRIATE INSTALLATION OR
OPERATION, OR FROM ANY SERVICE THAT IS UNDERTAKEN BY NON-AUTHORIZED PERSONNEL,
OR FROM THE USE OF ANY PARTS EXCEPT THOSE THAT ARE APPROVED BY THE
MANUFACTURER. ANY SUCH INSTALLATION, USE OR SERVICE WILL IMMEDIATELY VOID THE
MANUFACTURER’S WARRANTY.
ANY MODIFICATIONS TO THE APPLIANCE THAT ARE PERFORMED WITHOUT THE WRITTEN
PERMISSION OF MEIKO WILL IMMEDIATELY VOID THE MANUFACTURER’S WARRANTY.
AN ELECTRICAL WIRING DIAGRAM IS LOCATED INSIDE THE
LOWER-FRONT COMPARTMENT OF THIS MACHINE.
