Operating instructions GK 60
Datei:BA_GK60_9670999_EN_1997-08.doc
9670999
21/24
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
17.1 Basic safety measures during normal operation
Observe the maintenance periods prescribed in the operating instructions!
Observe the maintenance instructions given in these operating instructions for individual
components!
CAUTION!
Before carrying out any maintenance or repair work, prohibit access to the operating area
to any unauthorized persons! Provide or display a sign drawing attention to the
maintenance or repair work!
Before implementing any maintenance or repair work the machine must be switched off
completely via the on-site power disconnection device and secured against reactivation
by using appropriate measures (e.g. via a padlock whose key is in the possession of the
person conducting the maintenance or repair work)! Failure to observe these precautions
can result in severe physical injury or damage to property.
CAUTION!
Before carrying out any maintenance and repair work, ensure that all the parts of the
machine that may be touched have cooled down to room temperature!
Carefully dispose of any cleaning products that could harm the environment!
17.1.1 Before putting back into operation following maintenance or
repair work
CAUTION!
Before starting operations following maintenance or repair work, all initial tests must be
carried out as described in “Machine Settings for Initial Commissioning by the Service
Engineer”.
17.1.2 Observe the environmental protection regulations
CAUTION!
Legal obligations relating to the avoidance of waste materials and to their
recycling/removal in accordance with applicable regulations must be observed!
In particular, during installation, repair and maintenance work, materials that could pollute
water such as: Grease and oils, Cleaning fluids containing solvents, must not pollute the
ground or run into the sewerage system! These materials must be stored, shipped,
collected and disposed of in suitable containers!
