Operating instructions GK 60
Datei:BA_GK60_9670999_EN_1997-08.doc
9670999
19/24
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
15
Staff training
Only trained and instructed personnel are allowed to work on the machine. Staff
responsibilities for the installation’s operation, maintenance and repair must be clearly
defined.
Any personnel undergoing training are only allowed to work on the machine installation
under the supervision of an experienced person.
Persons
Trained operating
personnel
Trained
in-house
technician
Trained in-house
technician or
installation
engineer
activity
Installation and assembly
Commissioning
Operation, use
Cleaning
Checking safety devices
Fault finding
Troubleshooting,
mechanical
Troubleshooting,
electrical
Maintenance
Repairs
Training should be recorded in writing.
16
Operating errors
Despite being expertly designed, the machine may develop minor faults which are usually
easy to eliminate. This section explains a number of possible problems and how you can
deal with them yourself.
Before carrying out work on the open appliance, it MUST be disconnected from the
power supply. The machine is to be switched off completely with the on-site power
disconnection device here. Should any of the operational faults described arise
repeatedly, their cause must be established in each case.
Faults not described here can in general only be eliminated by a technician or
electrician. Please contact the agency responsible or the authorised dealer.
