Megger TM1700 Series, User Manual

Page: 65 / 92

BL1448GE ZP-BL16E TM1700-sEriEs 65
5 PErFOrM TEsTiNG
Parameter Default value Editable in
TM1700
Compression Off yes
No. of Control sec-
tions activated 1 yes (if applica-
ble)
Trig out mode Off yes
Duration 100ms yes
Trig in source C, O,
CO, OC, OCO Operate / Meas-
ure yes
static resistance Off yes
Dynamic resistance Off yes
Coil resistance Off yes
Transducer type
Analog/Digital Analog yes
Transducer type Lin-
ear/Angular same as original
breaker No
Absolute / relative Absolute yes
Nominal stroke same as original
breaker yes (Per Motion
channel. Before
only one entry
per breaker)
Conversion - Conver-
sion table No conversion yes (if applica-
ble, i.e. if there
is a calculated
MOTiON graph
defined in the
test plan for the
corresponding
Objectid)
Conversion Linear -
Conversion factor 1 yes (if applica-
ble, i.e. if there
is no calculated
MOTiON graph
defined in the
test plan for the
corresponding
Objectid)
speed calculation
points same as original
breaker yes
Import circuit breaker set-ups from
CABA Win
you can import pre-defined breakers from CABA Win
into CABA Local in the instrument.
IMPORTANT
The import function only supports circuit
breaker set-up/test plans created or ap-
proved by Megger Sweden AB. Megger
Sweden AB takes no responsibility for
circuit breaker set-up/test plans manually
edited or created by users.
1]
Select “Import Breaker” from the Breaker
List.
2]
Browse for the breaker you wish to import
and click the “IMPORT” button.