Megger TM1700 Series, User Manual

Page: 49 / 92

BL1448GE ZP-BL16E TM1700-sEriEs 49
4 CABA LOCAL
2]
Press the “NO” button. The following screen
appears.
3]
Enter the calibration values in the fields
shown above the graphic. For quick naviga-
tion between the fields use the arrow but-
tons next to it.
4]
Type in a significant name for the transducer
into the “Transducer ID” field.
5]
Press the “Finish Calibration” button.
The evaluation starts and you will se the
result. If you get the “Calibration failure”
message you must recalibrate.
6]
Press the “BACK” button to leave the screen.
B. TM1700 as reference for calibrating a
resistive transducer
1]
Press the “Calibrate” button. The following
question appears.
2]
Press the “YES” button. The following ques-
tion appears.