Megger MPQSIM, User Manual

Page: 42 / 72

M
AVTMMPQSIM Rev 1 May 2017
36
14. Turn on Harmonics
a. Allow the unit to record for approximately 15 seconds (minimum).
b. Turn ON one of the voltage and current harmonic switches.
c. Let the unit record for about 1 minute.
d. Turn OFF the voltage and current harmonic switches.
e. Let the unit record for about another 15 seconds then stop the recording.
15. View the data on the MPQ Analyzer
a. View the RMS Charts.
b. View the Power Charts.
c. View the Harmonic Charts.
d. View the Event Data Charts.
NOTE: This data can also be transferred and viewed in the Megger PQ software.